Cariology and Operative Dentistry» Clearfil Protect Bond

Evaluation of experimental calcium-containing primer in adhesive system on micro-tensile bond strength and acid resistance.

pubmedbot — Tue, 25 Jun 2019 20:34:55 +0000

. Evaluation of experimental calcium-containing primer in adhesive system on micro-tensile bond strength and acid resistance. Dent Mater J. 2019 Jun 21;: Authors: Ochiai Y, Inoue G, Nikaido T, Ikeda M, Tagami J Abstract Modern adhesive systems have been developed for enhanced mechanical and antibacterial properties; however, no such systems contain a calcium source to …

Evaluation of experimental calcium-containing primer in adhesive system on micro-tensile bond strength and acid resistance.

pubmedbot — Tue, 25 Jun 2019 20:34:55 +0000

In situ characterization of resin-dentin interfaces using conventional vs. cryofocused ion-beam milling.

pubmedbot — Thu, 21 May 2015 01:39:29 +0000

. In situ characterization of resin-dentin interfaces using conventional vs. cryofocused ion-beam milling. Dent Mater. 2015 May 15; Authors: Bakhsh TA, Sadr A, Mandurah MM, Shimada Y, Zakaria O, Tagami J Abstract OBJECTIVE: The introduction of focused ion beam (FIB) milling has facilitated preparation of hard tissue samples for transmission electron microscope (TEM). However, this …

Effect of fluoride concentration in adhesives on morphology of acid-base resistant zones.

pubmedbot — Fri, 02 Aug 2013 13:57:06 +0000

Effect of fluoride concentration in adhesives on morphology of acid-base resistant zones. Dent Mater J. 2013;32(4):578-84 Authors: Kirihara M, Inoue G, Nikaido T, Ikeda M, Sadr A, Tagami J Abstract This study aimed to investigate the effect of fluoride concentration in adhesives on morphology of acid-base resistant zone (ABRZ). Seven experimental adhesives with different concentrations …

Morphological categorization of acid-base resistant zones with self-etching primer adhesive systems.

pubmedbot — Tue, 27 Mar 2012 10:45:04 +0000

Morphological categorization of acid-base resistant zones with self-etching primer adhesive systems. Dent Mater J. 2012 Mar 23; Authors: Inoue G, Nikaido T, Sadr A, Tagami J Abstract This study investigated the influence of the composition of self-etching primer adhesive systems on the morphology of acid-base resistant zones (ABRZs). One-step self-etching primer systems (Clearfil Tri-S Bond, …

Scrubbing Effect of Self-etching Adhesives on Bond Strength to NaOCl-treated Dentin.

pubmedbot — Sat, 28 Jan 2012 21:16:01 +0000

Scrubbing Effect of Self-etching Adhesives on Bond Strength to NaOCl-treated Dentin. J Adhes Dent. 2011 Nov 4; Authors: Prasansuttiporn T, Nakajima M, Foxton RM, Tagami J Abstract Purpose: To evaluate the scrubbing effect of self-etching adhesive systems on the microtensile bond strengths to sodium hypochlorite-treated dentin. Materials and Methods: The occlusal surfaces of 36 extracted …

Ultramorphological Evaluation of the Dentin Acid-Base Resistant Zone of Two-step Self-etching Systems After Long-term Storage in Water.

pubmedbot — Sat, 28 Jan 2012 21:16:01 +0000

Ultramorphological Evaluation of the Dentin Acid-Base Resistant Zone of Two-step Self-etching Systems After Long-term Storage in Water. J Adhes Dent. 2012 Jan 11; Authors: Ichikawa C, Nikaido T, Inoue G, Sadr A, Tagami J Abstract Purpose: To evaluate the morphological changes in the acid-base resistant zone (ABRZ) at the resin/dentin interface after long-term storage in …

Effect of reducing agents on bond strength to NaOCl-treated dentin.

pubmedbot — Fri, 02 Sep 2011 10:22:05 +0000

Effect of reducing agents on bond strength to NaOCl-treated dentin. Dent Mater. 2011 Mar;27(3):229-34 Authors: Prasansuttiporn T, Nakajima M, Kunawarote S, Foxton RM, Tagami J Abstract OBJECTIVE: The purpose of this study was to evaluate the effect of three antioxidant/reducing agents with different application times on microtensile bond strengths to sodium hypochlorite-treated dentin. METHODS: The …

Effect of resin coating and occlusal loading on microleakage of Class II computer-aided design/computer-aided manufacturing fabricated ceramic restorations: a confocal microscopic study.

pubmedbot — Fri, 02 Sep 2011 10:22:05 +0000

Effect of resin coating and occlusal loading on microleakage of Class II computer-aided design/computer-aided manufacturing fabricated ceramic restorations: a confocal microscopic study. Acta Odontol Scand. 2011 May;69(3):182-92 Authors: Kitayama S, Nasser NA, Pilecki P, Wilson RF, Nikaido T, Tagami J, Watson TF, Foxton RM Abstract OBJECTIVE: To evaluate the effect of resin coating and occlusal …

Improving the effect of NaOCl pretreatment on bonding to caries-affected dentin using self-etch adhesives.

pubmedbot — Fri, 02 Sep 2011 10:22:03 +0000

Improving the effect of NaOCl pretreatment on bonding to caries-affected dentin using self-etch adhesives. J Dent. 2009 Oct;37(10):769-75 Authors: Taniguchi G, Nakajima M, Hosaka K, Iwamoto N, Ikeda M, Foxton RM, Tagami J Abstract OBJECTIVE: To evaluate the effect of sodium hypochlorite pretreatment on adhesion to normal and caries-affected dentin using self-etch adhesives. METHODS: Forty …

Bond strength of a resin cement to dentin using the resin coating technique.

pubmedbot — Fri, 02 Sep 2011 10:22:02 +0000

Bond strength of a resin cement to dentin using the resin coating technique. Braz Oral Res. 2008 Jul-Sep;22(3):198-204 Authors: Santos-Daroz CB, Oliveira MT, Góes MF, Nikaido T, Tagami J, Giannini M Abstract The aim of this study was to evaluate the bond strength of a resin cement to dentin using different adhesive systems (AS) in …

Reinforcement of dentin in self-etch adhesive technology: a new concept.

pubmedbot — Fri, 02 Sep 2011 10:22:02 +0000

Reinforcement of dentin in self-etch adhesive technology: a new concept. J Dent. 2009 Aug;37(8):604-9 Authors: Waidyasekera K, Nikaido T, Weerasinghe DS, Ichinose S, Tagami J Abstract OBJECTIVE: Characterize the ultramorphology and secondary caries inhibition potential of different dentin adhesive systems in order to find a satisfactory explanation resist to recurrent caries. METHODS: Human premolar dentin …

Influence of hydrostatic pulpal pressure on the microtensile bond strength of all-in-one self-etching adhesives.

pubmedbot — Fri, 02 Sep 2011 10:22:01 +0000

Influence of hydrostatic pulpal pressure on the microtensile bond strength of all-in-one self-etching adhesives. J Adhes Dent. 2007 Oct;9(5):437-42 Authors: Hosaka K, Nakajima M, Monticelli F, Carrilho M, Yamauti M, Aksornmuang J, Nishitani Y, Tay FR, Pashley DH, Tagami J Abstract PURPOSE: To evaluate the microtensile bond strength (microTBS) of two all-in-one self-etching adhesive systems …

Effects of one-year storage in water on bond strength of self-etching adhesives to enamel and dentin.

pubmedbot — Fri, 02 Sep 2011 10:22:01 +0000

Effects of one-year storage in water on bond strength of self-etching adhesives to enamel and dentin. Dent Mater J. 2008 Mar;27(2):266-72 Authors: Ansari ZJ, Sadr A, Moezizadeh M, Aminian R, Ghasemi A, Shimada Y, Tagami J, Ansari SJ, Moayedi S Abstract The aim of this study was to compare the bond strengths of three self-etching …